Mini-Lathe Dream Cutter
Full Specification at : http://www.dreamcutter.com/mldc30_product.html
Supports Mini-Lathes with 6"-7.25 / 15-17cm Swing over bed
Maximum cutting primary radius is 1.5", secondary .5" to turn and neck up to 3:" diameter ball or dish. Optional accessories increase capacities and flexibility.
Dimensions:Body 2.5/6.35cm diameter x .64”/17mm height.
Mounting: (2) 6M low profile bolts, 3cm apart. and center hole for direct compound swap with most mini-lathes or mount universally on cross-slide bed with T-Nuts. Mount must be located so that Dream Cutter is able to advance to lathe axis center with cross-slide (lathe y axis) transverse adjustment.
Adjustable tool holder height distance range from lathe saddle to work axis center :
1.62-(2.25)-2.5 | 41mm-(57mm)-63mm
Min (optimum) Max Min (optimum) Max
Tool plate set to cam lock 1/4" tool at optimum. Some adjustment to tool plate cam or shims may required to adapt other tools to extreme ends of range. Up to 3/8" tool accommodated.
Ships in padded aluminum convenient instrument case with adjustable divider. Case dimensions: 9 Length x 6 Width x 8 Height
Aluminum diamond embossed surface panels surrounded by sturdy aluminum frame
8 High impact rounded plastic corners for durability
Polished metal u-snap lock with two keys
EVA grey high density foam throughout interior of case
2 grey, easily positioned, front to back EVA high density foam dividers
8 black, polished steel brace supports, one on every corner, for abrasion protection
Sturdy black plastic carry handle
2 polished metal hinges with metal bar supports attaching top cover to case
4 non-marring black rubber, non-skid, quarter circle feet for case stability in vertical position
Molded egg carton shell type foam in top lid to protect contents
High density foam on bottom to protect tool.